Pinkcity Paints

There are the some steps which has to follow while painting your house which has been approved by Asian Paints https://www.asianpaints.com/.

Some General steps to follow while Paintingwww.pinkcitypaints.com/paints/ Walls:

1. Prepare the room: Remove all furniture, decorations, and other items from the walls and cover the floor and any remaining furniture with drop cloths or plastic sheeting.
2. Clean the walls: Use a damp cloth or sponge to wipe down the walls to remove any dust, dirt, or grime. If there are any areas with mold or mildew, use a mixture of water and bleach to clean them and allow them to dry completely.
3. Repair any damage: Use spackle or putty to fill in any holes or cracks in the walls. Once it dries, sand the surface smooth.
4. Tape off edges: Use painter’s tape to cover any areas that you don’t want to paint, such as trim, door frames, and windows.
5. Apply primer: If the walls are a new surface, or you’re making a dramatic color change, applying primer can help the paint adhere better and look more even. Allow the primer to dry completely before applying paint.
6. Paint the walls: Use a paint roller to apply the paint in even strokes. Start at the top of the wall and work your way down, being careful to avoid drips and splatters. Use a paintbrush to get into corners and edges.
7. Apply a second coat: Once the first coat is dry, apply a second coat of paint to ensure even coverage and a smooth finish.
8. Clean up: Remove the painter’s tape before the paint dries completely. Clean your brushes and roller with soap and water, and dispose of any used drop cloths or plastic sheeting.

General steps to follow while Wood Polishing www.pinkcitypaints.com/wood-polish/:

1. Preparation: Remove all dust, dirt, and debris from the wood surface with a soft-bristled brush or a vacuum cleaner. If the wood surface is particularly dirty, you may need to use a wood cleaner or wood soap to remove any stains or grime. Allow the wood to dry completely before proceeding.
2. Sanding: Sand the wood surface with fine-grit sandpaper (220-grit) to create a smooth and even surface. Sand in the direction of the grain of the wood. Once you have finished sanding, wipe away any dust with a clean cloth.
3. Staining (optional): If you want to change the color of the wood, apply a wood stain with a brush or cloth. Wipe away any excess stain with a clean cloth, and allow the stain to dry completely according to the manufacturer’s instructions.
4. Applying the polish: Using a soft cloth, apply the wood polish in the direction of the grain of the wood. Start at one end of the wood surface and work your way to the other end, making sure to apply the polish evenly. Allow the polish to dry completely before proceeding.
5. Buffing: Once the polish has dried, use a clean and dry cloth to buff the wood surface. Buffing helps to remove any excess polish and creates a smooth and shiny finish. For best results, buff in the direction of the wood grain.
6. Repeat as necessary: Depending on the type of wood polish you are using, you may need to repeat the process several times to achieve the desired level of shine and protection.

Some general steps to follow while Applying Wallpapers www.pinkcitypaints.com/wallpaper-and-textures/:

1. Preparation: Remove any old wallpaper, dust, and debris from the wall surface. Make sure the wall is clean and dry before proceeding.
2. Measuring: Measure the height and width of the wall you want to cover. Add a few inches to each measurement to ensure you have enough wallpaper to cover the entire surface. Cut the wallpaper into manageable lengths, and mark each length with the appropriate pattern repeat.
3. Applying wallpaper adhesive: Mix the wallpaper adhesive according to the manufacturer’s instructions. Use a paint roller or brush to apply the adhesive to the back of the wallpaper, making sure to cover the edges and corners thoroughly.
4. Hanging the wallpaper: Starting from one corner of the wall, carefully align the top edge of the wallpaper with the ceiling or crown molding. Smooth the wallpaper down the wall, making sure to avoid any bubbles or wrinkles. Repeat the process for each length of wallpaper, making sure to match the pattern repeat and create a seamless look.
5. Trimming the wallpaper: Once you have hung all the wallpaper, use a sharp knife or scissors to trim any excess wallpaper at the top and bottom of the wall. Make sure to cut along the edge of the ceiling and baseboard for a clean finish.
6. Finishing touches: After the wallpaper has dried completely, use a damp sponge or cloth to remove any excess adhesive from the surface of the wallpaper. Allow the wallpaper to dry completely before decorating the room.

These are the general steps to follow while Applying Textures www.pinkcitypaints.com/wallpaper-and-textures/:

1. Preparation: Remove any old wallpaper, dust, and debris from the wall surface. Make sure the wall is clean and dry before proceeding.
2. Choosing the texture: Choose the type of texture you want to apply. There are many different types of textures, such as popcorn, knockdown, skip trowel, and orange peel. Select the texture that best suits your needs and the look you want to achieve.
3. Applying the texture: Mix the texture material according to the manufacturer’s instructions. Use a trowel, sprayer, or roller to apply the texture to the wall. Make sure to work in small sections to ensure even coverage.
4. Creating the desired pattern: Once the texture material is applied to the wall, use a trowel, brush, or other tool to create the desired pattern. For example, if you are applying a skip trowel texture, use a trowel to create small peaks and valleys in the texture.
5. Allowing the texture to dry: Once the texture is applied and the pattern is created, allow the texture to dry completely. The drying time will vary depending on the type of texture material and the humidity and temperature of the room.
6. Sanding and smoothing: After the texture has dried, use sandpaper or a sanding block to smooth out any rough spots or uneven areas in the texture. This step is important to ensure a smooth and even finish.
7. Finishing touches: Once the texture is smooth and even, you can prime and paint the wall to create the desired look.

Few general steps to follow while Applying Waterproofing www.pinkcitypaints.com/water-proofing/:

1. Preparation: Remove any dirt, debris, and loose material from the surface that needs waterproofing. Make sure the surface is clean and dry before proceeding.
2. Choosing the waterproofing material: There are different types of waterproofing materials available, such as liquid membranes, sheet membranes, and cementitious coatings. Choose the waterproofing material that is appropriate for your surface and the area that needs waterproofing.
3. Applying the waterproofing material: Apply the waterproofing material according to the manufacturer’s instructions. Use a brush, roller, or sprayer to apply the material to the surface. Make sure to work in small sections and apply the material evenly.
4. Allowing the material to dry: Once the waterproofing material is applied, allow it to dry completely. The drying time will vary depending on the type of material and the humidity and temperature of the area.
5. Applying a second coat (optional): Some waterproofing materials require a second coat for maximum effectiveness. If this is the case with your chosen material, apply a second coat once the first coat is dry.
6. Sealing any gaps or cracks: Use a sealant to fill any gaps or cracks in the surface that may allow water to penetrate. Make sure to seal any areas where the waterproofing material may have missed.
7. Finishing touches: Once the waterproofing is complete, you can apply a final coat of paint or other finishing material to create the desired look.

If you have any query related to any of the polish or paints . U can ask on chat box or dm on Instagram.